ELC-S1

 

Type Bending


Model ELC-S1
Rated Output (R.O.) 1.0mv/V 20%
Zero Balance 20% of R.O.
Creep at Rated Capacity(1 min) 0.1% of R.O.
Nonlinearity 0.5% of R.O.
Hysteresis 0.15% of R.O.
Input Impedance 1000 ohm 20%
Output Impedance 1000 ohm 20%
Temperature Compensated 0 C to 40 C
Temperature Effect on Output ----------
Temperature Effect on Zero ----------
Safe Overloading 1.5 x Rated Capacity
Recommended Excitation 10V DC OR AC
Material Tool steel
Capacity 5,8 kgs

Low cost load cell used to convert from mechanical to electronic indication. Optional half bridge available.

||  Homepage of Elane ||             ||  Back to Load Cell ||