ELC - 03


 

Type Single Point Bending Beam


Model ELC-03
Rated Output (R.O.) 2.0mv/V 5%
Zero Balance 1% of R.O.
Creep at Rated Capacity(20min) 0.02% of R.O.
Nonlinearity, Hysteresis and Repeatability 0.02% of R.O.
Input Impedance 415 ohm 15 ohm
Output Impedance 350 ohm 3 ohm
Temperature Compensated 0 C to 50 C
Temperature Effect on Output 0.002% of Applied Load/C
Temperature Effect on Zero 0.004% of Applied Output/C
Safe Overloading 1.5 x Rated Capacity
Recommended Excitation 10V DC OR AC
Material Aluminum Alloy
Capacity 100,150,200,300,350 kg

The ELC-03 series load cells are primarily designed for use in single cell, low profile bench scales. They can also be used as replacement in the 60-300kg range to provide increased load cell replacement. Maximum recommended platform size-50x50cm.

||  Homepage of Elane ||             ||  Back to Load Cell ||