In our involvement and
experience in postal scales, postage label printers and other postal
accessories for many years ELANE has designed a very useful
mailroom product which is easy to use by any worker and is very fast.
No more measuring each dimension with a measuring tape and enter
into a calculator to assess the volume - the CUBICMETER is
performing this accurately in a few seconds, shows the data on the
display and transmits the results via Bluetooth to a mail software,
such as the Stamps.com client.
- Used to determine
the volume of parcels and packages
- Automatically sends
X, Y, Z, (length, width, and height) and calculated volume data
to PC or Bluetooth devices (smartphones and tablets)
interface software included
connectivity - automatic pairing
- Uses an electronic compass to determine
change between vertical and horizontal axes when measuring
- Replaceable acrylic
- 2 Models:
: Model QBM-U - USA model 1/4 inch reading
optional wallholder with charger
: Model QBM-M - Metric model 5mm reading
20 inches/50.0 cm with + button to
extend to 40 inches/100.0 cm
or even 60 inches/150 cm
0.25 inch/0.5cm - The result is
sufficiently accurate for parcel services
White on blue, 4 lines by 16 character
Green, Yellow, Red, and Blue LED to denote
statuses or errors
5 Tactile buttons
Speaker sound to denote status or error
Rechargeable NiCd battery
Battery is charged using the micro USB
port, USB adapter is supplied
Automatically turns off after 2 minutes of
Bluetooth 2.0/Bluetooth 4.0 for data
Micro USB socket for battery charging and
Software included - other services in
*Trademark, Copyright, and Patent applied for
** Stamps.com is a trademark of Stamps.com Inc.
This button is used to switch the Qubicmeter on or off.
- CE/CA: This button
is used to clear inputs or go back to the previous function or
- RM: This button
recalls the last 5 measurements that were made by the Cubicmeter.
- +: This button can
be used to extend and add the measurement of dimensions that are
over the Cubicmeter’s length.
- Start: This button
is used to start with the automatic measurements of X, Y, Z
dimensions and to calculate volume afterwards. Hold this button
for 3 secs to enter the Airline Mode.
A) Automatic Mode
- Scan any horizontal
dimension (length or width) first.
- Scan the vertical
- Scan the other
horizontal dimension (length or width, depending which one was
first scanned in step #1.
- The dimensions and
volume are automatically displayed.
B) Manual Mode
- For odd-shaped or
parcels with non-reflective packaging, manual mode can be used
to measure the dimensions of the parcels.
- User will put a
finger in the LED sensor on the estimated dimension (inspection
- The Cubicmeter will
detect the reflections from the finger and use this dimension
B) Airline Mode
- This feature is useful for checking the
baggage’s total dimension (length + width + height)
To enter the Airline Mode, Hold the
Start key for about 3 seconds. The airplane icon will
be displayed to indicate that the Qubicmeter is in
- Press CE button once
to rescan or re-measure the last dimension.
- Press CE button
twice to rescan or re-measure all the dimensions from the start.
- For both automatic
and manual mode, if the dimension exceeds 50 cm, the Plus (+)
button can be used to measure the exceeding dimension. Press the
(+) button to allow measurement of the extended dimension and
this will be automatically added to the previous measurement.
3 Easy Steps: